• New round of pollution inspections underway
    New round of pollution inspections underway September 06, 2017
        China’s environmental inspections will cover all provincial regions this year, according to the Ministry of Environmental Protection (MEP). Inspectors will monitor local conditions and push local governments to fulfill their responsibilities, the MEP said.     On August 9th, China launched a new round of central environmental inspections covering eight provincial-level areas, as the country finishes nationwide investigations into local environmental protection efforts. A total of eight provinces including: Jilin, Zhejiang and Shandong provinces will be the most hit hard.     Lots of factory closures in China for environmental reviews are happening right now. According to the China Daily, about 10,000 polluting companies were ordered to suspend production or shut down by the end of June. And many factories are experiencing unexpected delays in productions,related supply chain has been affected by the inspection.
    View More
  • Oman clients visit our Hangzhou Office
    Oman clients visit our Hangzhou Office July 20, 2017
      Mr Paresh, which is the Supply Manager represent One of the Biggest construction company in Oman have visited our Hangzhou office on 11th July.   And Mr Paresh have visited our hardware and hand tools Show room, expressed the interesting of our products. He hope we can supply quality tools to meet their big demand on their project tools request.   Meanwhile, Mr Paresh also introduced their construction project in all Middle East country, hope we can make the strategy business cooperation in the future. The department Manager Mr Wang of CNBM have expressed the warmest welcome to Mr Paresh can visit our Hangzhou office.   Our company was the biggest national owned building material company in China, we believed we have the ability and confidence to cooperated with overseas enterprise. And beside the hardware and hand tools, we also have the chance to cooperate in building material products.
    View More
  • Why You Should Clean Your Garden Tools
    Why You Should Clean Your Garden Tools May 22, 2017
    Although cleaning garden tools regularly (preferably after every use) is ideal, tending to trusty blades and spades prior to storage will help extend their life and effectiveness.   Leonard Perry, an extension professor at the University of Vermont who specializes in ornamental horticulture, floriculture and herbaceous perennial production, says regular maintenance helps preserve sharp edges on digging tools, prevents rust and removes soil that may have been contaminated by diseased plants. It also means a fresh start come spring.   The Nitty-Gritty   “All tools are important to clean, especially those made with metal because of the risk of rust,” says Shirley Bovshow, landscape and edible-garden designer and proprietor of EdenMakers Garden Design. “Tools with moving parts or joints are especially vulnerable because of the crevices that trap dirt and moisture.”   For trowels, spades, shovels and pruners, Bovshow advises the tried-and-true method of first cleaning away dirt and garden debris, then, after mixing motor oil into a 5-gallon bucket filled with sand — just enough to moisten the sand slightly — dipping the tools into the bucket and swirling them around a bit. “The grit of the sand will remove encrusted dirt,” Bovshow says. “And the motor oil will protect the metal from rust.”   The gardening gurus at the National Gardening Association offer an alternative method for deep cleaning: Soak the metal ends of tools in a tub or bucket of hot, soapy water for 10 to 15 minutes, then rinse with water and dry each tool thoroughly. Once dry, use WD-40 to lubricate the metal blades of shears and pruners and the metal heads of other tools and wipe away the excess.   To condition wood handles, the NGA recommends smoothing out rough, splintery spots with medium-grained sandpaper, then rubbing with a small amount of linseed oil. The oil will aid in preserving the wood, reduce splintering and guard against rot.   Sanitize Pruners Frequently   “Pruners should be sanitized with convenient bleach wipes or sanitizing spray before using them on plants,” Bovshow says. “If you are pruning several plants, pruners should be sanitized in between plants to prevent the spread of diseases and bacteria.” Remove Rust   If rust has found its way onto your tools, the NGA suggests scrubbing the area with a bit of steel wool and a dab of Naval Jelly rust dissolver, which should be used only in well-ventilated areas. Rubber or plastic gloves and safety glasses should be worn when using the gel too, because it contains hazardous chemicals.   If this sounds more than a little scary, the gardening association has a second option: Use a stiff wire brush to get off as much rust as you can, then apply a rust-inhibiting primer and paint the tools according to product directions.   Obviously, preventing rust is always Plan A. To do this, keep tools clean, dry and stored away from moisture.   An Ounce of Prevention   Av...
    View More
  • World gross product of Dental Hand Tools Industry is forecast to expand by 2.7 per cent in 2017 and 2.9 per cent in 2018
    World gross product of Dental Hand Tools Industry is forecast to expand by 2.7 per cent in 2017 and 2.9 per cent in 2018 May 22, 2017
    The Global Dental Hand Tools Industry Situation and Prospects Research report is a professional and in-depth study on the current state of the Dental Hand Tools industry. In 2016, the world economy expanded by just 2.2 per cent, the slowest rate of growth since the Great Recession of 2009. Underpinning the sluggish global economy are the feeble pace of global investment, dwindling world trade growth, flagging productivity growth and high levels of debt. World gross product is forecast to expand by 2.7 per cent in 2017 and 2.9 per cent in 2018, with this modest recovery more an indication of economic stabilization than a signal of a robust and sustained revival of global demand. Given the close linkages between demand, investment, trade and productivity, the extended episode of weak global growth may prove self-perpetuating in the absence of concerted policy efforts to revive investment and foster a recovery in productivity. This would impede progress towards the Sustainable Development Goals (SDGs), particularly the goals of eradicating extreme poverty and creating decent work for all. For the sake of making you deeply understand the Dental Hand Tools industry and meeting you needs to the report contents, Global Dental Hand Tools Industry Situation and Prospects Research report will stands on the report reader’s perspective to provide you a deeply analysis report with the integrity of logic and the comprehensiveness of contents. We promise that we will provide to the report reader a professional and in-depth industry analysis no matter you are the industry insider?potential entrant or investor. Firstly, the report provides a basic overview of the industry including definitions, classifications, applications and industry chain structure. The Dental Hand Tools market analysis is provided for the international market including development history, competitive landscape analysis, and major regions’ development status. Secondly, development policies and plans are discussed as well as manufacturing processes and cost structures. This report also states import/export, supply and consumption figures as well as cost, price, revenue and gross margin by regions (United States, EU, China, India and Japan), and other regions can be added. Then, the report focuses on global major leading industry players with information such as company profiles, product picture and specification, capacity, production, price, cost, revenue and contact information. Upstream raw materials, equipment and downstream consumers analysis is also carried out. What’s more, the Dental Hand Tools industry development trends and marketing channels are analyzed. Finally, the feasibility of new investment projects is assessed, and overall research conclusions are offered. In a word, the report provides major statistics on the state of the industry and is a valuable source of guidance and direction for companies and individuals interested in the market.
    View More
  • Actively Responding to the New Trend of the Global Distribution of the Manufacturing Industry
    Actively Responding to the New Trend of the Global Distribution of the Manufacturing Industry April 28, 2017
    Source: CNBM Date: Apr 21, 2017 From March 18 to 20, China Development Forum 2017 with the theme of “China and the World: Economic Restructuring and Structural Reform” was held by the Development Research Center of the State Council in Diaoyutai State Guesthouse in Beijing. Zhang Gaoli, a member of the Standing Committee of the Political Bureau of the CPC Central Committee and vice premier of the State Council, attended the opening ceremony and delivered a speech. Scholars, experts, entrepreneurs, government officials and representatives of international organizations from home and abroad attended the opening ceremony.  Song Zhiping, chairman of China National Building Material Group, attended the forum at invitation and delivered a keynote speech at the Economic Summit with the theme of “New Trends of Global Distribution of the Manufacturing Industry”, and discussed with He Guorui, chairman of (United Technologies, Zhao Guohua, chairman of Schneider Electric, Xi Guohua, general manager of CRRC, Xu Lirong, chairman of China COSCO Shipping and Yu Yong, chairman of HBIS Group. The group discussion was chaired by US UL Company’s president Keith E. Williams.  Song Zhiping said, in terms of the global distribution of the manufacturing industry, China’s rapid rise is reshaping the global distribution of the manufacturing industry.  Now developing countries are speeding up the returning of the manufacturing industry, the US again attaches great importance to the real industry, Europe proposed re-industrialization and China launched the “Made in China 2025” strategy.  China’s manufacturing industry is also robustly developing, from low-end in the past to medium and high-end. On the other hand, Chinese enterprises’ tapping into the international market is inevitable.  In the past 30 years, Western developed countries wanted to open the Chinese market.  But nowadays, trade protectionism and counter-internationalization mentality are rising in some countries and regions.  China is facing the dual pressure from the returning of the high-end business to developed countries and the transfer of medium and low-end business to countries with lower costs. Judging from the global economic development process, Chinese enterprises’ tapping into the international market is inevitable.  Song expounded the three points very important for the development trend of China’s manufacturing industry. First, China should upgrade itself from a country with a big manufacturing industry into a country with a strong manufacturing industry. In the world’s economic rebalancing process, Chinese manufacturers should take the initiative to speed up their transformation, upgrading and innovative development. Second, Chinese enterprises should deep cooperation with global advanced enterprises.  Following the “One Belt, One Road” initiative, Chinese enterprises should tap into the international market with their quality equipment, tech...
    View More
  • Zimbabwe’s Largest Cement Plant Constructed by Overseas Development Branch, Sinoma International Engineering Co., Ltd. Was Put into Production
    Zimbabwe’s Largest Cement Plant Constructed by Overseas Development Branch, Sinoma International Engineering Co., Ltd. Was Put into Production April 28, 2017
    CNBM News Source: Sinoma Date: Mar 17, 2017 On March 16, Zimbabwe’s cement plant with the largest production capacity and the state-of-the-art facilities constructed by the Overseas Development Branch, Sinoma International Engineering Co., Ltd. (Sinoma EE) held the completion and production commencement ceremony in Harare, Zimbabwe’s capital. The Zimbabwean President Robert Mugabe attended the completion and production commencement ceremony and delivered a speech. In his speech, President Mugabe expressed his thanks to the Overseas Development Branch, Sinoma International Engineering Co., Ltd. for having completed the plant construction with high efficiency and high quality by using cutting-edge technologies. He said, the factory was designed and construction in full accordance with the world’s most advanced emission standards, minimizing pollutant emission, which resulted from the Chinese partner’s technological capabilities. This project is located in SunwayIndustrial Park in the east of Harare. The construction was started in May 2015, and the factory was put into production after construction for one year and 9 months. The design capacity is 100 tons/hourand the annual production capacity is about 700,000 tons.  The performance indicators were met, and the project progress, the construction quality, the work safety and other aspects were fully recognized by the owner, PPC Group.  The smooth commencement of production demonstrated another successful practice of the cement project services of China National Building Material Group in Africa.  Mike Bimha, Zimbabwe’s industry and commerce minister, Huang Ping, the Chinese Ambassador to Zimbabwe, Mbete, the South Africa’s Ambassador to Zimbabwe, and other political VIPs, Meng Qinglin, Sinoma EE’s chairman of the Overseas Development Branch, Sinoma International Engineering Co., Ltd. and Yu Yang, Sinoma EE’s deputy general managers attended the construction completion and production commencement ceremony.  
    View More
  • Things to Consider in the Selection of a Spray Gun
    Things to Consider in the Selection of a Spray Gun April 05, 2017
    Spray guns are essential tool needed on the application of finishing touches to furniture, and there are plenty of available diverse spray guns in the market to select from. Before buying any kind of spray guns that will suit to your need, you have to consider first some different procedures before purchasing this stuff.   You have to decide by yourself the total amount of spraying that you are planning to do. Majority of factories make use of airless spraying system that is very costly but also efficient and speedy. You may select spraying system that is less costly such as turbine HVLP (high-volume, low pressure) or a high-volume, low pressure compressor. Consider also the various tools that are already available in the shops. If you have a compressor or other devices which need a compressor to function, you have to get a compressor that is high-volume and a low pressure spray gun. Ensure that the compressor can able to create sufficient pound of air/ square inch (PSI) to give energy to a high-volume, low power spray gun. You have to verify the gun for its pound of air/square inch requirements. FORGE   You have to obtain an engine which is high- volume, low pressure system if you do not possess or you do not like to a compressor. Choose an engine which has 3 to 5 stages with six psi capability when you have the intention of spraying plain finishes. Choose the kind of bowl you desire for spray gun. The followings are the fundamental procedures in selecting spraying gun used in auto paint.   There are many selections among HVLP spraying guns for car paint. Initially, you are required to select between siphon-feed and gravity-feed spray guns. Gravity-feed gun for car paint keeps their supply of paint in the plunger. Hand Cultivator   Make a decision regarding your objectives. If you have a plan to coat a single car, your procurement decision matters if you have a plan to paint plenty of cars. Select high-volume, low pressure gun intended for car paint. HVLP (high-volume, low pressure) is a new equipment for car paints. This is well-organized, less risky for the environment and less disastrous to health. HVLP spray gun is preferable for car paint.   Siphon-feed spraying gun hoards their supply of paint below the nozzle. Spray guns which are gravity feed have significant benefits. Primarily, they utilizes about the entire paint, because all paints are consumed and there is nothing left in the base of the jug or container. Secondly, the design lets you see that easier the balance of the paint in the container and prevent spraying with the use of much air as well as insufficient paint. Lastly, it is frequently easier to operate in tense spaces and also tight location. It is really advisable to make use of spraying guns that gravity-feed.   If you have a limited budget, you can choose a toy gun having only one tip. Heavier paint id needed for bigger tips. If you are planning to apply a plain coating, it is then obvious tha...
    View More
  • CTIEC Won the Bid of Heidelberg Cement Projects
    CTIEC Won the Bid of Heidelberg Cement Projects April 05, 2017
    Source: CTIEC Date: Jan 16, 2017 On January 13, CTIEC won the Phase IV coal transportation project of Shymkent Cement Plant of Heidelberg Cement AG. This project is the first Herdelberg Cement project won by CTIEC after Herdelberg Cement purchased Italcementi Gruppo, marking a new chapter in the cooperation between CTIEC and Heidelberg Cement AG. With a history of over 140 years, Heidelberg Cement AG is the second largest cement manufacturer in the world, operating in over 60 countries across the globe. As a high-end international owner, it adopts strict requirements for security, cost, progress and quality. The Phase IV coal transportation project is the EPC turn-key project, including design, transformation, supply, transportation, customs clearance, construction, commissioning, performance examination, etc. The bidding of this project lasted for over five months, and the competition was very fierce. After six rounds of offers and multiple negotiations, CTIEC finally won the bid. The Shymkent clinker line project, which was signed between CNBM and Italcementi in October, 2012, was the fastest overseas project. Its security and quality exceeded the requirements of contract, and each key performance indicator was excellent. Therefore, it has been praised by Heidelberg Cement AG on many occasions, and was regarded as an internal benchmark by the owner. Phase III project of Shymkent cement plant, which was signed by CTIEC in September, 2015 and commenced on May, 2016, is basically completed now, which is over one month in advance of the contract schedule. At present, it is preparing for the performance examination. Winning the bid shows that Heidelberg Cement AG highly recognizes CTIEC, the favorable relationship between CTIEC and Heidelberg Cement AG is extended, and a solid foundation is laid for a long-term partnership between both sides.
    View More
1 2 3 4 5

A total of 5 pages

Leave A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.