News

FORGE HAND TOOLS
home

News

  • 17

    10-26

    Carton Fair for hardware & tools Finished Perfectly
    Carton Fair for hardware & tools Finished Perfectly
    Source: CNBMIT Date: October 26, 2017    The 122th Canton Fair of Hardware & Tools had come to a close, wrapping up five days of busy networking between hundreds of traders from throughout the region and suppliers of hardware, tools and machinery.     This event brought the concerned people all together on a common ground. Forge tools as one of hardware and hand tools supplier, attract the crowds of customers and visitors, also some manufacturers come to booth to communicate with forge tools staff about the products. Forge tools prepare hundreds of tools to show in this exhibition, includes hand tools, garden tools, power tools accessories, and safety products.   Lots of distributors, retailers, contractors from the MENA region, come to forge tools booth to try to use the tools. A distributor from USA recognized and highly appreciated the tape measure of forge tools about its wide dual blade and the auto lock system, but also the magnetic hook and so on. Besides the measuring tools, painting brush also attracts lots customers.   Forge tools will attend more exhibitions and join more associations, let more customers know full range tools of forge through more ways.

  • 17

    09-20

    Iran clients vist our head office in Shenzhen
    Iran clients vist our head office in Shenzhen
        Mr Ali, which is the General Manager of a big tools company in Iran have visited our Head office in Shenzhen on 11th Sep.     There was a very successfully meeting in our head office , and Mr Ali have introduced the Iran local market demands of hand tools and hardware .Mr Ali also exchanged the opinion on the future cooperation both on hardware and hand tools. and our company will fully support their business in Iran market.

  • 17

    09-13

    Forge-Tools Will Attend the 122nd Canton Fair
    Forge-Tools Will Attend the 122nd Canton Fair
    Source: CNBMIT Date: September 13, 2017 Forge-Tools of CNBMIT will attend the the 122nd Canton Fair as exporter during Oct 15th to Oct 19th. The Canton Fair is one of the famous dedicated trade events in the world for the hardware, tools, material and machinery sectors, and so on,all kinds of products. Over the years, its comprehensive industry-wide reach has seen it become a vital business and networking event for manufacturers, suppliers, buyers and professionals. There are many Chinese brands in tools,as one of exhibitors in this exhibition, we also presented over 400 products to valued customers and visitors, includes all our lastest products. We prepared a huge range of hand tools, garden tools, power tools accessories and safety products. We look forward to welcoming all dear valued customers and visitors, and provide professional products and services. Paper catalogues and E-catalogue will be free to present to you. Enclosed our booth information as below: Exhibition Center: The Pazhou Exhibition Center Booth Number: 16.4 C05 Date: Oct 15th to Oct 19th 2017  

  • 17

    09-06

    New round of pollution inspections underway
    New round of pollution inspections underway
        China’s environmental inspections will cover all provincial regions this year, according to the Ministry of Environmental Protection (MEP). Inspectors will monitor local conditions and push local governments to fulfill their responsibilities, the MEP said.     On August 9th, China launched a new round of central environmental inspections covering eight provincial-level areas, as the country finishes nationwide investigations into local environmental protection efforts. A total of eight provinces including: Jilin, Zhejiang and Shandong provinces will be the most hit hard.     Lots of factory closures in China for environmental reviews are happening right now. According to the China Daily, about 10,000 polluting companies were ordered to suspend production or shut down by the end of June. And many factories are experiencing unexpected delays in productions,related supply chain has been affected by the inspection.

  • 17

    07-20

    Oman clients visit our Hangzhou Office
    Oman clients visit our Hangzhou Office
      Mr Paresh, which is the Supply Manager represent One of the Biggest construction company in Oman have visited our Hangzhou office on 11th July.   And Mr Paresh have visited our hardware and hand tools Show room, expressed the interesting of our products. He hope we can supply quality tools to meet their big demand on their project tools request.   Meanwhile, Mr Paresh also introduced their construction project in all Middle East country, hope we can make the strategy business cooperation in the future. The department Manager Mr Wang of CNBMIT have expressed the warmest welcome to Mr Paresh can visit our Hangzhou office.   Our company was the biggest national owned building material company in China, we believed we have the ability and confidence to cooperated with overseas enterprise. And beside the hardware and hand tools, we also have the chance to cooperate in building material products.

  • 17

    05-22

    Why You Should Clean Your Garden Tools
    Why You Should Clean Your Garden Tools
    Although cleaning garden tools regularly (preferably after every use) is ideal, tending to trusty blades and spades prior to storage will help extend their life and effectiveness.   Leonard Perry, an extension professor at the University of Vermont who specializes in ornamental horticulture, floriculture and herbaceous perennial production, says regular maintenance helps preserve sharp edges on digging tools, prevents rust and removes soil that may have been contaminated by diseased plants. It also means a fresh start come spring.   The Nitty-Gritty   “All tools are important to clean, especially those made with metal because of the risk of rust,” says Shirley Bovshow, landscape and edible-garden designer and proprietor of EdenMakers Garden Design. “Tools with moving parts or joints are especially vulnerable because of the crevices that trap dirt and moisture.”   For trowels, spades, shovels and pruners, Bovshow advises the tried-and-true method of first cleaning away dirt and garden debris, then, after mixing motor oil into a 5-gallon bucket filled with sand — just enough to moisten the sand slightly — dipping the tools into the bucket and swirling them around a bit. “The grit of the sand will remove encrusted dirt,” Bovshow says. “And the motor oil will protect the metal from rust.”   The gardening gurus at the National Gardening Association offer an alternative method for deep cleaning: Soak the metal ends of tools in a tub or bucket of hot, soapy water for 10 to 15 minutes, then rinse with water and dry each tool thoroughly. Once dry, use WD-40 to lubricate the metal blades of shears and pruners and the metal heads of other tools and wipe away the excess.   To condition wood handles, the NGA recommends smoothing out rough, splintery spots with medium-grained sandpaper, then rubbing with a small amount of linseed oil. The oil will aid in preserving the wood, reduce splintering and guard against rot.   Sanitize Pruners Frequently   “Pruners should be sanitized with convenient bleach wipes or sanitizing spray before using them on plants,” Bovshow says. “If you are pruning several plants, pruners should be sanitized in between plants to prevent the spread of diseases and bacteria.” Remove Rust   If rust has found its way onto your tools, the NGA suggests scrubbing the area with a bit of steel wool and a dab of Naval Jelly rust dissolver, which should be used only in well-ventilated areas. Rubber or plastic gloves and safety glasses should be worn when using the gel too, because it contains hazardous chemicals.   If this sounds more than a little scary, the gardening association has a second option: Use a stiff wire brush to get off as much rust as you can, then apply a rust-inhibiting primer and paint the tools according to product directions.   Obviously, preventing rust is always Plan A. To do this, keep tools clean, dry and stored away from moisture.   An Ounce of Prevention   Av...

  • 17

    05-22

    World gross product of Dental Hand Tools Industry is forecast to expand by 2.7 per cent in 2017 and 2.9 per cent in 2018
    World gross product of Dental Hand Tools Industry is forecast to expand by 2.7 per cent in 2017 and 2.9 per cent in 2018
    The Global Dental Hand Tools Industry Situation and Prospects Research report is a professional and in-depth study on the current state of the Dental Hand Tools industry. In 2016, the world economy expanded by just 2.2 per cent, the slowest rate of growth since the Great Recession of 2009. Underpinning the sluggish global economy are the feeble pace of global investment, dwindling world trade growth, flagging productivity growth and high levels of debt. World gross product is forecast to expand by 2.7 per cent in 2017 and 2.9 per cent in 2018, with this modest recovery more an indication of economic stabilization than a signal of a robust and sustained revival of global demand. Given the close linkages between demand, investment, trade and productivity, the extended episode of weak global growth may prove self-perpetuating in the absence of concerted policy efforts to revive investment and foster a recovery in productivity. This would impede progress towards the Sustainable Development Goals (SDGs), particularly the goals of eradicating extreme poverty and creating decent work for all. For the sake of making you deeply understand the Dental Hand Tools industry and meeting you needs to the report contents, Global Dental Hand Tools Industry Situation and Prospects Research report will stands on the report reader’s perspective to provide you a deeply analysis report with the integrity of logic and the comprehensiveness of contents. We promise that we will provide to the report reader a professional and in-depth industry analysis no matter you are the industry insider?potential entrant or investor. Firstly, the report provides a basic overview of the industry including definitions, classifications, applications and industry chain structure. The Dental Hand Tools market analysis is provided for the international market including development history, competitive landscape analysis, and major regions’ development status. Secondly, development policies and plans are discussed as well as manufacturing processes and cost structures. This report also states import/export, supply and consumption figures as well as cost, price, revenue and gross margin by regions (United States, EU, China, India and Japan), and other regions can be added. Then, the report focuses on global major leading industry players with information such as company profiles, product picture and specification, capacity, production, price, cost, revenue and contact information. Upstream raw materials, equipment and downstream consumers analysis is also carried out. What’s more, the Dental Hand Tools industry development trends and marketing channels are analyzed. Finally, the feasibility of new investment projects is assessed, and overall research conclusions are offered. In a word, the report provides major statistics on the state of the industry and is a valuable source of guidance and direction for companies and individuals interested in the market.

  • 17

    04-28

    Actively Responding to the New Trend of the Global Distribution of the Manufacturing Industry
    Actively Responding to the New Trend of the Global Distribution of the Manufacturing Industry
    Source: CNBM Date: Apr 21, 2017 From March 18 to 20, China Development Forum 2017 with the theme of “China and the World: Economic Restructuring and Structural Reform” was held by the Development Research Center of the State Council in Diaoyutai State Guesthouse in Beijing. Zhang Gaoli, a member of the Standing Committee of the Political Bureau of the CPC Central Committee and vice premier of the State Council, attended the opening ceremony and delivered a speech. Scholars, experts, entrepreneurs, government officials and representatives of international organizations from home and abroad attended the opening ceremony.  Song Zhiping, chairman of China National Building Material Group, attended the forum at invitation and delivered a keynote speech at the Economic Summit with the theme of “New Trends of Global Distribution of the Manufacturing Industry”, and discussed with He Guorui, chairman of (United Technologies, Zhao Guohua, chairman of Schneider Electric, Xi Guohua, general manager of CRRC, Xu Lirong, chairman of China COSCO Shipping and Yu Yong, chairman of HBIS Group. The group discussion was chaired by US UL Company’s president Keith E. Williams.  Song Zhiping said, in terms of the global distribution of the manufacturing industry, China’s rapid rise is reshaping the global distribution of the manufacturing industry.  Now developing countries are speeding up the returning of the manufacturing industry, the US again attaches great importance to the real industry, Europe proposed re-industrialization and China launched the “Made in China 2025” strategy.  China’s manufacturing industry is also robustly developing, from low-end in the past to medium and high-end. On the other hand, Chinese enterprises’ tapping into the international market is inevitable.  In the past 30 years, Western developed countries wanted to open the Chinese market.  But nowadays, trade protectionism and counter-internationalization mentality are rising in some countries and regions.  China is facing the dual pressure from the returning of the high-end business to developed countries and the transfer of medium and low-end business to countries with lower costs. Judging from the global economic development process, Chinese enterprises’ tapping into the international market is inevitable.  Song expounded the three points very important for the development trend of China’s manufacturing industry. First, China should upgrade itself from a country with a big manufacturing industry into a country with a strong manufacturing industry. In the world’s economic rebalancing process, Chinese manufacturers should take the initiative to speed up their transformation, upgrading and innovative development. Second, Chinese enterprises should deep cooperation with global advanced enterprises.  Following the “One Belt, One Road” initiative, Chinese enterprises should tap into the international market with their quality equipment, tech...

A total of 5 pages

INQUIRY NOW

Just fill your E-mail address, we’ll contact you within 24 hours. Thank you!

Contact Us

# #
  • *
  • *